Our Extender is great for those who want a longer open time with the paint, to help minimize the look of brush strokes and to extend drying time.

Recommended ratio of 15 mL per pint (500 mL) of paint. 

Using too much of this product will increase drying time substantially, but also increases cure time.  Add maximum 10% of original paint volume. 

• Makes Fusion Mineral Paint and other water based paints flow more smoothly

• your drying and curing time.  

  CLEAN UP:

  Soap and water.
  SURFACE PREPARATION:

  Prep your piece as you would to paint with Fusion Mineral Paint. Clean your piece with TSP and give it a light scuff sand.

  PREPARATION:

  Mix 1/4 a bottle (15ml) – 1/2 a bottle of Extender (30ml) together with a pint. 1 bottle is good for to 2-4 pints. Adding more is not recommended as it will impact your drying and curing time.  

  CLEAN UP:

  Soap and water.
  SURFACE PREPARATION:

  Prep your piece as you would to paint with Fusion Mineral Paint. Clean your piece with TSP and give it a light scuff sand.

 Extender works by not allowing the paint to dry quickly, therefore giving you what’s known in the paint industry as “more open time”, which is more working time with the paint before it dries. Extender can help eliminate the appearance of brush strokes. 

• Makes Fusion Mineral Paint and other water based paints flow more smoothly 

• Reduces brush and roller marks 

• Reduces wear on spray guns 

• Cure time may increase depending on how much Extender is added. 

• This eco friendly version does not add additional VOC’s!